A-01
PRECISION COLD STEEL AND EARTHING SOLUTIONS | EST. 1968
SHAPED BY PRECISION. BUILT TO PERFORM.
Cold drawn bright bars and HB wires in EN grades. Tight tolerances, consistent quality, delivered on the date we said. Manufacturing in Sonipat since 1968.
SINCE 1968 · 25,000+ TONNES A YEAR · ROUND, SQUARE, HEX · h9 / h11 TOLERANCE · NEW FOR 2026: COPPER BONDED EARTHING
58 Years.
On The Record.
58 Years.
On The Record.
1968
Founded as a precision cold drawing steel works
1968
Founded as a precision cold drawing steel works
25000 T
25000 T
Bright bar produced per year wires
2-100 mm
2-100 mm
Round, square and hex sections
h9/h11
h9/h11
Tolerance held on cold drawn bar
1968
Founded as a precision cold drawing steel works
25000 T
Bright bar produced per year wires
2-100 mm
Round, square and hex sections
h9/h11
Tolerance held on cold drawn bar
Bright bars and HB wires have been the core of this business since 1968. Everything else we make is built on the same drawing line.
Bright bars and HB wires have been the core of this business since 1968. Everything else we make is built on the same drawing line.
Supplied to the Approved Vendors of:
Supplied to the Approved Vendors of:
Since inception we have supplied the approved vendor networks of internationally recognised brands across automotive components, hydraulics and pneumatics, engineering and general fabrication.
Since inception we have supplied the approved vendor networks of internationally recognised brands across automotive components, hydraulics and pneumatics, engineering and general fabrication.
A-03
What We Make
A-03
What We Make
Bright Bars & Wires
Bright Bars & Wires
Cold drawn round, square and hex sections, HB wire and polished wire. 2 to 100 mm, EN grades, h9 and h11.
Cold drawn round, square and hex sections, HB wire and polished wire. 2 to 100 mm, EN grades, h9 and h11.
Earthing & Lightning Protection
Earthing & Lightning Protection
New for 2026. Copper bonded rods, electrodes, air terminals and complete protection systems.
New for 2026. Copper bonded rods, electrodes, air terminals and complete protection systems.
Conductors, Strips & Accessories
Conductors, Strips & Accessories
Conductors, strips, enhancement compound, jointing systems and the fittings that finish an installation.
Conductors, strips, enhancement compound, jointing systems and the fittings that finish an installation.
A-04
The Full Range
Filter by division. Every entry carries its size range, standard and grade.
A-04
The Full Range
Filter by division. Every entry carries its size range, standard and grade.
Round Bright Bar
2 to 100 mm · h9 / h11 · EN grades
Round Bright Bar
2 to 100 mm · h9 / h11 · EN grades
COLD DRAWN
Square Bright Bar
4 to 65 mm · h9 / h11 · EN grades
Square Bright Bar
4 to 65 mm · h9 / h11 · EN grades
COLD DRAWN
Hex Bright Bar
5 to 70 mm · h9 / h11 · EN grades
Hex Bright Bar
5 to 70 mm · h9 / h11 · EN grades
COLD DRAWN
HB Wire
Drawn to gauge · Coils
HB Wire
Drawn to gauge · Coils
High volume
Polished Wire
Bright finish · Coils
Polished Wire
Bright finish · Coils
COLD DRAWN
Steel Round Bar
Cut to length · Mixed grades
Steel Round Bar
Cut to length · Mixed grades
COLD DRAWN
Copper Bonded Earth Rods
250 microns · 10 to 50 mm · UL 467
Copper Bonded Earth Rods
250 microns · 10 to 50 mm · UL 467
NEW FOR 2026
Earthing Electrodes
2 and 3 m · 50 and 76 mm OD · 25 to 250 microns
Earthing Electrodes
2 and 3 m · 50 and 76 mm OD · 25 to 250 microns
NEW FOR 2026
Conductors, Strips and Compound
8 and 10 mm · 25 x 3 to 50 x 6 mm · ASTM B227
Conductors, Strips and Compound
8 and 10 mm · 25 x 3 to 50 x 6 mm · ASTM B227
NEW FOR 2026
Lightning Protection and Exothermic
ESE and Franklin · IEC 62305 · NFPA 780
Lightning Protection and Exothermic
ESE and Franklin · IEC 62305 · NFPA 780
NEW FOR 2026
A-05
How Our Bright Bar Is Made
A-05
How Our Bright Bar Is Made
M-01
Raw Material In
M-02
Precision Cold Drawing
M-03
Straightening & Finishing
M-04
Inspection & Dispatch
M-01
Wire rod and billet arrive against grade and are checked on receipt before anything enters the line.
Output —
verified material, batch recorded
M-01
Wire rod and billet arrive against grade and are checked on receipt before anything enters the line.
Output —
verified material, batch recorded
M-02
Drawing and peeling bring the section down to size and give the bright finish the tolerance depends on.
output —
cold drawn section to size
M-02
Drawing and peeling bring the section down to size and give the bright finish the tolerance depends on.
output —
cold drawn section to size
M-03
Straightening, polishing and cutting to length. This is where h9 and h11 are held or lost.
output —
finished bar to tolerance
M-03
Straightening, polishing and cutting to length. This is where h9 and h11 are held or lost.
output —
finished bar to tolerance
M-04
Dimensional and surface inspection against the order, then bundling, marking and dispatch
Output —
inspected consignment with test certificate
M-04
Dimensional and surface inspection against the order, then bundling, marking and dispatch
Output —
inspected consignment with test certificate
A-06
The Details Buyers Actually Check.
The Details Buyers Actually Check.
A-06
The Details Buyers Actually Check.
Established
1968
Established
1968
Entity
S.S. EW Private Limited
S.S. EW Private Limited
Plant Location
Sonipat, Haryana, Ind
Sonipat, Haryana, Ind
Output
25000+
tonnes bright bar per year
Output
25000+
tonnes bright bar per year
Established
1968
Entity
S.S. EW Private Limited
Plant Location
Sonipat, Haryana, Ind
Output
25000+
tonnes bright bar per year
A-07
Built On Precision. Grounded In Trust.
A-07
Built On Precision. Grounded In Trust.
Precision Cold Drawn Steel
Precision Cold Drawn Steel
made in house, trusted for generations.
h9/h11 Tolerance
h9/h11 Tolerance
Held on cold drawn bar as standard, batch after batch.
Trusted Since 1968
Trusted Since 1968
Fifty eight years, three generations, one plant.
In House Manufacturing
In House Manufacturing
Drawing, finishing and inspection in our own plant.
2 - 100 mm
2 - 100 mm
Round, square and hex, across EN grades.
A-10
Tell Us What You Need
Send the size, grade and quantity. We respond to every enquiry within one working day.
A-10
Tell Us What You Need
Send the size, grade and quantity. We respond to every enquiry within one working day.